全自動超聲波清洗機的五大清洗因素是：

The five cleaning factors of automatic ultrasonic cleaning machine are as follows:

1：頻率

1: Frequency

關于差另外洗滌器材，抉擇差另外超聲波頻率。五金，機器，汽摩擦，壓縮機等行業或重污染的一樣平常物體的潔凈大多采用20KHz的頻率潔凈器；光學，光電子，電路板，執行室一樣平常用具大多采用40KHz的頻率；謀略機微電子元件，集成電路芯片，硅片和波膜多采用80KHz以上的頻率，可去除微米，亞微米級的污垢和潔凈樣品，無破壞。

On the other washing equipment, choose another ultrasonic frequency. Hardware, machinery, steam friction, compressor and other industries or heavy pollution of the same ordinary objects mostly use 20kHz frequency cleaner; optics, optoelectronics, circuit board, executive room, common appliances mostly use 40KHz frequency; computer microelectronic components, integrated circuit chips, silicon wafers and wave film mostly use the frequency above 80kHz, which can remove micron and submicron pollution Scale and clean sample, no damage.

2：功率

2: Power

目前我司通用標準產物已設定產物容量與超聲波功率成正比(超聲波功率為0.3-0.5W/cm2)；大功率產物多用于五金，機器等行業的一樣平常物體洗滌或重污染(超聲波功率為0.5-1W/cm2)。

At present, our general standard products have set that the product capacity is directly proportional to the ultrasonic power (ultrasonic power is 0.3-0.5w/cm2); high power products are mostly used for washing or heavy pollution of common objects in hardware, machinery and other industries (ultrasonic power is 0.5-1w / cm2).

3：時間

3: Time

差另外洗滌器材應設定差另外洗滌時刻，抉擇相符的時刻(一樣平常洗滌時刻為10-20min)有利于更好地洗滌樣品；時刻過長會導致洗滌樣品外貌出現斑點，妨礙外貌光潔度。時刻太短，不能拂拭。

In addition, the washing equipment should be set with different washing time, and choosing the right time (the usual washing time is 10-20min) is conducive to better washing samples; too long time will lead to spots on the surface of washed samples and hinder the appearance smoothness. The time is too short to wipe.

4：溫度

4: Temperature

因為各裝置的物理特性差別，因此洗滌時應抉擇差另外洗滌溫度，如油脂類一樣平常大于50℃；鋁件，超聲波洗滌機一樣平常抉擇40℃閣下，溫度過高，會形成氧化斑；毛刺類一樣平常抉擇小于15℃為宜。獨特的恒溫技能，確保洗滌器材在恒溫環境下事變無破壞（我司恒溫產物恒溫0-80℃，±2℃）。

Due to the different physical characteristics of each device, it is necessary to choose a different washing temperature, such as grease, which is usually higher than 50 ℃; for aluminum parts, ultrasonic washing machine is usually selected at 40 ℃. If the temperature is too high, oxidation spots will be formed; if burr is the same, it is better to choose less than 15 ℃. Unique constant temperature skills, to ensure that washing equipment in the constant temperature environment without damage (our constant temperature products constant temperature 0-80 ℃, ± 2 ℃).

5:洗滌液

5: Washing solution

通例洗滌溶液（介質）有：水性溶液，酒精，汽油等有機溶液。

General washing solution (medium) includes: aqueous solution, alcohol, gasoline and other organic solutions.

現代超聲波洗滌劑是各種除垢劑、潤濕劑和其他反響組分的混合物。有許多優異和有針對性的洗滌劑可供抉擇。準確抉擇洗滌劑關于到達適合的洗滌效果和幸免洗滌液與洗滌器材之間的反響至關主要。

Modern ultrasonic detergent is a mixture of various detergents, wetting agents and other reactive components. There are many excellent and targeted detergents to choose from. Accurate selection of detergents is crucial to achieve the appropriate washing effect and the reaction between detergent and washing equipment.